Inverter Problems and Solutions | Inverter Not Working | Troubleshooting

A decade ago, inverters were used only in offices to have uninterrupted electricity supply. But now, inverters are used even in homes. In businesses, completion of targets is mandatory and every device right from computers to appliances such as ceiling fans should work in offices. If the current goes, then the inverters are the alternatives. But what if the inverter gets repaired? It can lead to a complete shutdown of devices and appliances. So, it is necessary to know about common inverter problems and solutions.

Let us look into them one by one.

Added to wishlistRemoved from wishlist 0

Inverter Repair Service at just 200 Repair and service

5

400.00 200.00

 

Common Inverter Problems and Solutions

1. Does The Inverter Not Switch On?

One of the most common inverter problems and solutions. There are many reasons such as loose battery terminals, disconnected batteries, tripping of the inverter, reversing of battery terminals. Do you have a doubt that the power switch has gone defective? Then you need to hire the services of an inverter repair technician. But if you find that the battery is tripped, then set the trip reset button then reset it.

If you find that the charge for the inverter has gone down, then you need to charge it for a few hours. Also, check the terminals. If they are loose, then wipe out the corrosive parts. Clean them and clamp them to the desired connections.

2. Battery Has Not Got Charged

Another common inverter problems and solutions. The reason is a dead battery. So it has to get a replacement. The other reasons are loose connections in the batteries, fuse melting, and burnt rectifiers. So, you must take professional help from an inverter repair technician to get the inverter back to working condition. Also, do not forget to have a second look at the battery terminals for corrosion.

3. Has The Backup Time Come Down For Your Inverter?

Just have a second look. Why did you buy the inverter in the first place? To be an alternative when the electricity goes out. And if the inverter has less backup time. Then it is time to identify the reasons. The reason could be power consumption has become more, and you must take off the unnecessary loads. Please note, if the battery has become completely charged.

Kindly check if the inverter has the required number of electrolytes. If less, then there will be a short backup time. Also, check the water levels in the inverter. It had to stay at a certain level between the maximum and minimum line. This is another simple issue among the DIY inverter problems and solutions.

Added to wishlistRemoved from wishlist 0

Inverter Repair Service at just 200 Repair and service

0

400.00 200.00

 

4. Does The Power Inverter Work In The Inverter Mode?

Do you encounter this kind of problem? Then the reasons are disconnected input or melted fuse. The solution is – identify the power cable, check and change the fuse. But if the input protector has become ineffective, then it is time to reset the part. This part, you can compare to the fuse in your home. It protects the inverter in times of high voltage. You can either get a stabilizer to regulate the voltage or seek the services of an experienced inverter repair pro for this inverter problems and solutions.

5. Does The Alarm Beep Continuously?

It is not a common inverter problem. The main reasons are because of the overload, or the cooling fan has become stuck. In the first case, you can disconnect and take off extra loads. If you are not able to take off the load, then it is time to get an inverter repair technician for assistance.

Please note that every inverter model has a cooling fan which should run continuously when the unit operates. If the cooling fan does not work properly, then the inverter gets shut off. In some inverters, you can hear the alarm. There are reasons that the fan may have got stuck due to many reasons. So, the inverter will not get cold air, and you get the alarm. This is a rare occasion. You find very rare instances of this kind of inverter problems and solutions.

6. False Codes in Inverters Display

The LCD displays false codes. The reason may be an internal problem. So it is time for a replacement of the inverter circuit. The external problems are related to the battery cables, output, and input wires as well as load. If you want to book a inverter repair technicians, you can find them in the bro4u app

 

Added to wishlistRemoved from wishlist 0

Inverter Repair Service at just 200 Repair and service

0

400.00 200.00

 

Conclusion

So, this is the article about inverter problems and solutions. Please note that many of this appliance issues can be solved by the DIY method. If you want to know about more home appliances, kindly visit our website for more details.

Ratings & Reviews
  • Service Ratings
4.7
We will be happy to hear your thoughts

Leave a reply